inconel 625 fasteners
Inconel 625 Screws, Inconel 625 Bolts Manufacturer In India.
Aashish Metal & Alloys is supplier of Inconel 625 Fasteners, which are immune to hydrogen chloride fuel line and sulphuric, acetic, and phosphoric acids.
The warmness-affected weld zones in Fasteners have decreased precipitation of carbides and different stages to make certain uniform corrosion resistance. Stringent chemistry manage in Fasteners alongside years of improvement has resulted within the alloy used today. Inconel UNS N06625 Nuts is utilized in fuel line refining, and additionally for maximum chemical technique programs within the welded circumstance. Inconel 625 Fasteners are made up of a nickel chromium alloy that has high heat resistance, strength and corrosion resistance. The applications of these fasteners such as the UNS N06625 Bolts are seen in cryogenic applications to elevated temperatures up to 1000 degrees Celsius.
- Inconel 625 Fasteners Specifications
- Inconel 625 Fasteners Equivalent Grades
- Inconel 625 Fasteners Quality and Test reports
- Inconel 625 Fasteners Surface Coating
- Inconel 625 Fasteners Standard
- Related Types Of Inconel 625 Fasteners
- Inconel 625 Bolts Sizes
- Inconel 625 Nuts Sizes
- Inconel 625 Screws Sizes
- Inconel 625 Washer Sizes
- Inconel 625 Stud Bolt Size Chart
- Chemical Composition
- Mechanical Properties
- Inconel 625 Fasteners price list
- We supply of variety Inconel 625 Fasteners
- Application Of Inconel 625 Fasteners
Nickel Alloy 625 Threaded Rod, DIN 2.4856 Studs, Inconel® Alloy 625 Socket Head Cap Screws, ASTM B446 Inconel 625 Stud Bolts, UNS N06625 Fasteners Suppliers in Mumbai, India.
The Inconel Fasteners are made up of Inconel material which is a super alloy that has nickel and chromium in its chemical composition. Fasteners must be heated to round 2250 Degree F (1230 Degree C) and held for a soak time, in which forging can be done right all the way down to round 1600 Degree F (870 Degree C). Supplied within the annealed circumstance, Inconel WNR 2.4856 Bolts achieves yield strengths of eighty ksi (550 Mpa), more than maximum austenitic and duplex chrome steel grades. It has splendid resistance to chloride stress – corrosion cracking, low coefficient of thermal expansion, and excessive thermal conductivity.
It cannot be hardened via way of means of warmness remedy however more potent floor strengths may be carried out via way of means of bloodless working. The excessive – temperature electricity of Fasteners is largely similar to within the variety of 950 Degree C – 1150 Degree C. Nickel-Alloy 625 Washers is frequently utilized in desalination flora, chemical technique industries, vessels, and piping, warmness exchangers, excessive stress RO flora and seawater piping.
Inconel 625 Fasteners Specifications
Specifications | ASTM B446 / ASME SB446 |
Standard | IS, BS, ASTM, ASME |
Length | 3mm to 200mm |
Size | M02 to M33, Custom Sizes |
Dimension Standard | DIN 933, ISO 4017, DIN 931, ISO 4014, DIN 982, DIN 985, DIN 912, ISO 7380, DIN 7991, DIN 125, ISO 7379, DIN 127, DIN 1481, DIN 975, DIN 6923, DIN 934, DIN 7984 |
External Coating | Teflon Coating, Oxidized, Zinc Plating, Chrome Plating, Mirror Buffed, Hot Dipped Galvanizing, Epoxy Coating, Electro Polished, Passivation |
Testing And Documents | Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports |
Packing | Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests |
Inconel 625 Fasteners Equivalent Grades
Grade Equivalent | JIS Equivalent | BS | EN/DIN Numerical Equivalent | UNS designation | EN |
---|---|---|---|---|---|
Inconel 625 | NCF 625 | NA 21 | 2.4856 | N06625 | NiCr22Mo9Nb |
Inconel 625 Faste1ners Quality and Test reports
- Third Party Inspection
- EN 10204/3.1B
- 100% Radiography Test
- Raw Materials Certificate
- Mill test
Inconel 625 Fasteners Surface Coating
- Xylon Coated Fasteners
- Hot Dipped Galvanizing Coated Fasteners
- Teflon Coated Fasteners
- PTFE Coated Fasteners
- Zinc Coated Fasteners
- Phosphate Coated Fasteners
- Cadmium Coated Fasteners
Inconel 625 Fasteners Standard
Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | BS 1769 | DIN 7984 | |
UNI 5731 | BS 1083 | ANSI B18.3 | |
UNI 5739 | BS 3692 | ISO 4762 | |
ISO 4014 | ISO 4032 | UNI 5931 | |
ISO 4017 | ISO 4033 | BS 2470 | |
BS 1769 | ANSI B18.2.2 | BS 4168 | |
BS 3692 | |||
ANSI B18.2.1 | |||
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
DIN 916 | BS 1981 | BS 4439 | BS 3410 |
DIN 551 | BS 483 | BS 2693 | |
DIN 553 | BS 2470 | Spring Washers | |
DIN 438 | DIN 127 | ||
BS 4168 | BS 4464 | ||
BS 1802 |
ANSI and/or ASME Standards Fasteners(inch series)
ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
---|---|---|---|
ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
We Supplied a Comprehensive Range Of Inconel 625 Fasteners
Related Types Of Inconel 625 Bolts
Inconel 625 Bolts
Inconel 625 Nuts
Inconel 625 Stud Bolts
Inconel 625 Washers
Inconel 625 Screw
Inconel 625 Anchor Bolts
Inconel 625 Threaded Rod
Inconel 625 Hex Bolts
Inconel 625 Bolts Size
Nominal or Basic Product Diameter | E | F | G | H | J | LT (Thread Length) | Y | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Body Diameter | Width Across Flats | Width Across Corners | Head Height | Wrenching Height | For Screw Lengths | For Screw Lengths | Transition Thread Length | ||||||||
1/4 | 0.25 | 0.25 | 0.245 | 7/16 | 0.438 | 0.428 | 0.505 | 0.488 | 5/32 | 0.163 | 0.150 | 0.106 | 0.750 | 1.000 | 0.250 |
5/16 | 0.3125 | 0.3125 | 0.3065 | 1/2 | 0.500 | 0.489 | 0.577 | 0.557 | 13/64 | 0.211 | 0.195 | 0.140 | 0.875 | 1.125 | 0.278 |
3/8 | 0.375 | 0.375 | 0.369 | 9/16 | 0.562 | 0.551 | 0.650 | 0.628 | 15/64 | 0.243 | 0.226 | 0.160 | 1.000 | 1.250 | 0.312 |
7/16 | 0.4375 | 0.4375 | 0.4305 | 5/8 | 0.625 | 0.612 | 0.722 | 0.698 | 9/32 | 0.291 | 0.272 | 0.195 | 1.125 | 1.375 | 0.357 |
1/2 | 0.5 | 0.5 | 0.493 | 3/4 | 0.750 | 0.736 | 0.866 | 0.840 | 5/16 | 0.323 | 0.302 | 0.215 | 1.250 | 1.500 | 0.385 |
9/16 | 0.5625 | 0.5625 | 0.5545 | 13/16 | 0.812 | 0.798 | 0.938 | 0.910 | 23/64 | 0.371 | 0.348 | 0.250 | 1.375 | 1.625 | 0.417 |
5/8 | 0.625 | 0.625 | 0.617 | 15/16 | 0.938 | 0.922 | 1.083 | 1.051 | 25/64 | 0.403 | 0.378 | 0.269 | 1.500 | 1.750 | 0.455 |
3/4 | 0.75 | 0.75 | 0.741 | 1-1/8 | 1.125 | 1.100 | 1.299 | 1.254 | 15/32 | 0.483 | 0.455 | 0.324 | 1.750 | 2.000 | 0.500 |
7/8 | 0.875 | 0.875 | 0.866 | 1-5/16 | 1.312 | 1.285 | 1.516 | 1.465 | 35/64 | 0.563 | 0.531 | 0.378 | 2.000 | 2.250 | 0.556 |
1 | 1 | 1 | 0.99 | 1-1/2 | 1.500 | 1.469 | 1.732 | 1.675 | 39/64 | 0.627 | 0.591 | 0.416 | 2.250 | 2.500 | 0.625 |
1-1/8 | 1.125 | 1.125 | 1.114 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 11/16 | 0.718 | 0.658 | 0.461 | 2.500 | 2.750 | 0.714 |
1-1/4 | 1.25 | 1.25 | 1.239 | 1-7/8 | 1.875 | 1.812 | 2.165 | 2.066 | 25/32 | 0.813 | 0.749 | 0.530 | 2.750 | 3.000 | 0.714 |
1-1/2 | 1.5 | 1.5 | 1.488 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 15/16 | 0.974 | 0.902 | 0.640 | 3.250 | 3.500 | 0.833 |
Inconel 625 Nuts Sizes
Nominal or Basic Major Diameter of Nut Thread |
Nuts Width Across Flats (F) |
Width Across Corners (G) | Thickness ofHex Nuts (H) | ||||||
---|---|---|---|---|---|---|---|---|---|
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 | 0.2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | 0.226 | 0.212 |
5/16 | 0.3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | 0.273 | 0.258 |
3/8 | 0.3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | 0.337 | 0.320 |
7/16 | 0.4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | 0.385 | 0.365 |
1/2 | 0.5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | 0.448 | 0.427 |
9/16 | 0.5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | 0.496 | 0.473 |
5/8 | 0.6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | 0.559 | 0.535 |
3/4 | 0.7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | 0.665 | 0.617 |
7/8 | 0.8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | 0.776 | 0.724 |
1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | 0.887 | 0.831 |
1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | 0.999 | 0.939 |
1-1/4 | 1.2500 | 1-7/8 | 1.875 | 1.812 | 2.165 | 2.066 | 1-1/16 | 1.094 | 1.030 |
1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
1-1/2 | 1.5000 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.317 | 1.245 |
1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
2 | 2.000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.456 | 2-3/8 | 2.431 | 2.319 |
3 | 3.000 | 4-1/2 | 4.500 | 4.350 | 5.196 | 4.959 | 2-19/32 | 2.654 | 2.534 |
Inconel 625 Screws Sizes
Screw Size | Body Dia | Hex Key Size | Head Height | Head Dia | Maximum Thread Length | Minimum Thread Length |
---|---|---|---|---|---|---|
No. 0 | 0.06 | 0.05 | 0.06 | 0.096 | 5/8 | 3/8 |
No. 1 | 0.073 | 1/16 | 0.073 | 0.118 | 7/8 | 3/8 |
No. 2 | 0.086 | 5/64 | 0.086 | 0.14 | 7/8 | 1/2 |
No. 3 | 0.099 | 5/64 | 0.099 | 0.161 | 7/8 | 1/2 |
No. 4 | 0.112 | 3/32 | 0.112 | 0.183 | 11/8 | 11/16 |
No. 5 | 0.125 | 3/32 | 0.125 | 0.205 | 1 | 11/16 |
No. 6 | 0.138 | 7/64 | 0.138 | 0.226 | 11/8 | 11/16 |
No. 8 | 0.164 | 9/64 | 0.164 | 0.27 | 11/4 | 3/4 |
No. 10 | 0.19 | 5/32 | 0.19 | 0.312 | 13/8 | 15/16 |
No. 12 | 0.216 | 5/32 | 0.216 | 0.345 | 11/4 | 15/16 |
1/4 | 0.250 | 3/16 | 1/4 | 3/8 | 11/2 | 15/16 |
5/16 | 0.3125 | 1/4 | 5/16 | 15/32 | 1-3/4 | 1-1/16 |
3/8 | 0.375 | 5/16 | 3/8 | 9/16 | 2 | 1-3/16 |
7/16 | 0.438 | 3/8 | 7/16 | 21/32 | 2-1/4 | 13/16 |
1/2 | 0.500 | 3/8 | 1/2 | 3/4 | 2-1/2 | 1-3/8 |
9/16 | 0.5625 | 7/16 | 9/16 | 27/32 | 2-7/16 | 1-5/8 |
5/8 | 0.625 | 1/2 | 5/8 | 15/16 | 3 | 1-5/8 |
3/4 | 0.750 | 5/8 | 3/4 | 11/8 | 3-1/2 | 1-7/8 |
7/8 | 0.875 | 3/4 | 7/8 | 15/16 | 3-3/4 | 2-1/16 |
1 | 1.000 | 3/4 | 1 | 11/2 | 4-1/2 | 2-1/4 |
1-1/8 | 1.125 | 7/8 | 1-1/8 | 111/16 | 4-21/32 | 2-13/16 |
1-1/4 | 1.250 | 7/8 | 1-1/4 | 17/8 | 5-3/32 | 3-1/8 |
1-1/2 | 1.500 | 1 | 1-1/2 | 21/4 | 6-5/64 | 3-3/4 |
1-3/4 | 1.750 | 11/4 | 1-3/4 | 25/8 | 7-1/8 | 4-3/8 |
2 | 2.000 | 11/2 | 2 | 3 | 8-7/64 | 5 |
Inconel 625 Washer Sizes
Size | Inside Diameter | Outside Diameter | Thickness |
---|---|---|---|
#2 | 3/32″ | 1/4″ | .020″ |
#4 | 1/8″ | 5/16″ | 1/32″ |
#6 | 5/32″ | 3/8″ | 3/64″ |
#8 | 3/16″ | 7/16″ | 3/64″ |
#10 | 7/32″ | 1/2″ | 3/64″ |
1/4 | 9/32″ | 5/8″ | 1/16″ |
5/16 | 11/32″ | 11/16″ | 1/16″ |
3/8 | 13/32″ | 13/16″ | 1/16″ |
7/16 | 15/32″ | 59/64″ | 1/16″ |
1/2 | 17/32″ | 1-1/16″ | 3/32″ |
9/16 | 19/32″ | 1-3/16″ | 3/32″ |
5/8 | 21/32″ | 1-5/16″ | 3/32″ |
3/4 | 13/16″ | 1-1/2″ | 9/64″ |
7/8 | 15/16″ | 1-3/4″ | 9/64″ |
1″ | 1-1/16″ | 2″ | 9/64″ |
1-1/8 | 1-3/16″ | 2-1/4″ | 9/64″ |
1-1/4 | 1-5/16″ | 2-1/2″ | 5/32″ |
1-1/2 | 1-7/16″ | 3″ | 3/16″ |
1-5/8 | 1-3/4″ | 3-3/4″ | 3/16″ |
1-3/4 | 1-7/8″ | 4″ | 3/16″ |
2 | 2-1/8″ | 4-1/2″ | 3/16″ |
Inconel 625 Stud Bolt Size Chart
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
---|---|---|---|---|---|---|---|---|
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
We Keep Bulk Stock Of Inconel 625 Bolts, Screws At Our Stockyard, Contact Us For Free Sample & Stock List.
Chemical Composition
Grade | C | MN | Si | P | S | Cu | Cr | Ti | Fe |
---|---|---|---|---|---|---|---|---|---|
Inconel 625 | 0.10 max | 0.50 max | 0.50 max | – | 0.015 max | 1.0 max | 20.0 – 23.0 | 0.40 max | 5.0 max |
Mechanical Properties
Grade | Density | Tensile Strength | Yield Strenght 0.2% Proof (MPa) Min | Elognation (%in 50mm) min | Melting Point | ||
---|---|---|---|---|---|---|---|
Inconel 625 | 8.4 g/cm3 | Psi – 1,35,000 , MPa -930 | Psi – 75,000 , MPa – 517 | 42.5 % | 1350 °C (2460 °F) |
For Inconel 625 Fasteners price list
Request the latest Inconel 625 Fasteners List. Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement. Aashish Metal & Alloys maintains a stock of all standard items and can export them at best price for Inconel 625 Fasteners.
We supply of variety Inconel 625 Fasteners
Aashish Metal & Alloys is a Highly Acclaimed Manufacturer & suppliers of Inconel 625 Fasteners offering more than 3000 varieties in all types of Inconel 625 Fasteners in all sizes, with more then 52 countries worldwide.
Inconel 625 Hex Cap Screw | Inconel 625 Hex Screw Supplier |
Alloy 625 Socket Cap Screw Exporter | Alloy 625 Countersunk Slotted Screws |
Alloy 625 DIN 933 Bolts Exporter | DIN 2.4856 Allen Cap Screw Manufacturer |
UNS N06625 Shoulder Bolt Supplier | Inconel Alloy 625 Self Tapping Screws |
Inconel 625 J Bolt Exporter | Inconel® Alloy 625 U Bolt Stockist |
Inconel 625 Fasteners | UNS N06625 Fasteners |
Inconel 625 Bolts Exporter | Inconel® Alloy 625 U Bolt |
ASTM B446 Alloy 625 Socket Cap Screw | DIN 2.4856 Fasteners Manufacturer |
ASTM B446 Alloy 625 Fastener | Inconel 625 Bolts Supplier |
Inconel UNS N06625 Heavy Hex Bolts | Inconel Alloy 625 Countersunk Slotted Screw |
Alloy 625 Threaded Rod Exporter | Inconel 625 Acorn Nuts Stockist |
Inconel 625 Nyloc Nuts | Nickel Alloy 625 Bolts Exporter |
Inconel 625 Screw | JIS NCF 625 Wing Nuts |
Alloy 625 Square Bolts Stockholder | UNS N06625 Coupling Nuts Distributor |
Inconel 625 Heavy Hex Nuts Dealer | Inconel 625 J Bolts |
Inconel Alloy 625 Self Drilling Screw | Alloy 625 Eye Bolts Traders |
Inconel 625 Ogee Washers | Inconel 625 Flat Washers Supplier |
625 Inconel Fender Washer Exporter | Inconel 625 Spring Washers |
Inconel 625 Self Tapping Screw | Inconel® Alloy 625 Self Drilling Screw |
625 Inconel Full Threaded Bolts | DIN 2.4856 Fasteners Manufacturer |
Inconel 625 Stud Bolts | Nickel Alloy 625 Allen Cap Screw |
Inconel 625 Heavy Hex Bolts | Inconel® Alloy 625 Wing Nuts |
Inconel 625 Spring Washers Dealer | 625 Inconel Countersunk Washer Exporter |
Alloy 625 Half Threaded Stud Bolt Supplier | Alloy 625 Flange Bolts Distributor |
UNS N06625 Anchor Bolts | Inconel 625 Square Nuts Stockholder |
Nickel Alloy 625 Stove Bolts Exporter | DIN 2.4856 Draw Bolt Traders |
Inconel 625 Nuts Manufacturer | Alloy 625 Hex Bolts |
Alloy 625 Fasteners | Inconel 625 Industrial Fasteners |
Application Of Inconel 625 Fasteners
Application Industry
For More Information About Inconel 625 Fasteners please call +91-22-66362223 / 66394926 or send an email to export@aashishmetal.com
Export Country
MIDDLE EAST Saudi Arabia | AFRICA Nigeria NORTH AMERICA Usa | EUROPE Russia | ASIA India SOUTH AMERICA Argentina |
Products
- Stainless Steel
- Duplex & Super Duplex
- Nickel Alloy
- Monel
- Inconel
- Hastelloy
- Alloy 20
- Titanium
- Copper Nickel
- Alloy Steel
- Carbon Steel
- Beryllium Copper
- Bimetal
Special Products
PRODUCT RANGE
Please feel free to contact us. We will get back to you with 2 business days. Or just call us now.